--- title: "Retrospect Error Code Table" slug: "retrospect-error-code-table" updated: 2023-11-13T23:28:46Z published: 2023-11-13T23:28:46Z canonical: "docs.retrospect.com/retrospect-error-code-table" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.retrospect.com/llms.txt > Use this file to discover all available pages before exploring further. # Retrospect Error Code Table Resources Below is a list of Retrospect error numbers and their description. 100 device rejected command 101 improper request 102 trouble communicating 103 unexpected beginning of media 104 unexpected end of media 105 unexpected end of data 106 data overwrite attempt 107 out of application memory 108 media changed 109 unexpected filemark 110 command canceled 111 library/magazine failure 112 can’t erase/format media 113 timeout waiting for device status 114 can’t use because file sharing is on 115 device unavailable 116 volume doesn’t exist 117 no devices available 118 no empty slots 119 no serial number 200 device status unknown 201 device unknown 202 wrong device settings 203 hardware failure 204 device busy 205 lost access to storage medium 206 drive reported a failure: dirty heads, bad media, etc. 207 unformatted media 208 media content unrecognized 209 media content damaged 210 wrong version 211 media locked 212 media erased 213 device in use 214 device ready 215 loading media 216 media unloaded 217 incompatible format 218 formatting media 219 library magazine not installed 240 erasing media 241 rewinding media 242 retensioning media 243 device reserved 244 transport quantum too small 245 contains Disk Backup Set data 246 reached file size limit 247 media load failure 248 cleaning cartridge detected 249 device scanning inventory 250 device reading 251 device writing 252 cleaning attempt failed 253 DLT WORM initialization invalid 501 backup client not activated 502 backup client: access denied 503 backup client turned off 504 backup client already activated 505 backup client reserved 506 duplicate activator code 507 incorrect password 508 access terminated 509 unknown service 510 unknown service command 511 unknown service message 512 incompatible version 513 duplicate service 514 too many services 515 Piton protocol violation 516 illegal request 517 backup client is busy 518 not enough backup client memory 519 network communication failed 522 backup client shutting down 523 service transaction error 524 invalid activator code 525 wrong client found at that address 526 backup client is locked 527 backup client was renamed 528 backup client in defer dialog 529 backup client is too slow 530 backup client not found 534 backup client: duplicate name 535 backup client: network unavailable 540 trouble creating service 541 backup client not installed or not running 542 no privileges to change clock 543 trouble saving backup client configuration 544 service being downloaded 551 too many transactions 552 backup client feature not supported 553 backup client not connected 554 backup client encryption not supported 555 backup client locally in use 556 backup client: network interface unavailable 557 transaction already complete 558 network connection down 559 network connection timeout 560 invalid private/public key 562 network connection reset by peer 591 invalid e-mail address 592 invalid response from SMTP server 593 invalid server address 594 lost communication with server 595 http responder closed unexpectedly 596 http server or the proxy server is unavailable 597 mail server not found 598 network connection timeout 612 element space full 625 not enough memory 630 bad program extension 631 duplicate program extension 632 conflicting program extension 641 chunk checksum didn’t match 642 chunk file map missing/damaged 643 not a chunk file or badly damaged 644 chunk file damaged during access 645 chunk file damaged during save 646 add resource failed 647 resource not found 648 attribute inconsistent with operation 649 remove resource failed 680 invalid license code 681 license out of date 682 license expired 683 license not allowed 684 license exceeded 685 license required 690 endian format not supported 691 corrupt persistent data 692 mismatched persistent data 693 persistent data too old 694 persistent data too new 701 Meson level function (or hook) not implemented 702 user failed to enter password within required time 703 need a user-entered password, but can’t ask 704 password is not acceptable (wrong, too long, too short) 705 encryption type is not implemented 801 wrong typed-space version 802 typed-space is corrupt 803 recursion too deep 804 invalid or unknown item type found 805 invalid item refnum found 806 circular reference during dupe/compare 807 keyed item type mismatch 808 key/refnum search failed 809 DL or entire handle is in use 810 this tyce already installed 811 this tyce not installed yet 830 can’t complete operation (e.g. due to inconsistency) 831 refnum is not a provider 832 refnum’s controller doesn’t exist 833 refnum’s controller doesn’t support this message 834 can’t move parent into child 835 can’t move outside transitive scope of required parent 836 controller refused to accept move 837 can’t move into a leaf 838 circularity found: too many links 839 can’t move immovable object 841 can’t forget a non-empty collection 842 M_PInstOpen denied for requested rights 843 resource is in use by another operation 844 can’t perform this operation on unreserved resource 901 launching service not available 902 launching service failed 1000 unknown 1001 unknown Windows OS error 1002 unknown Mac OS error 1003 unknown UNIX OS error 1004 Database Backup/Restore error 1010 API request bad 1011 API request impossible 1012 feature unsupported 1013 malformed name 1014 name already exists 1016 excessive recursion 1017 insufficient permissions 1018 not enough memory 1019 not enough resources 1020 sharing violation 1023 already exists 1024 enumeration complete 1025 enumeration incomplete 1026 resource not found 1050 printer needs paper 1051 print queue full 1052 no printer chosen 1060 scripting host failed 1061 launching executable failed 1062 command interpreter failed 1063 external script intervened 1100 invalid handle 1101 file/directory not found 1102 drive missing/unavailable 1103 write protected 1104 device not ready 1105 improper seek 1106 media blank 1107 read fault 1108 write fault 1109 open fault 1110 general i/o failure 1111 locked range conflict 1112 too many open files 1113 wrong disk in drive 1114 unexpected end of file 1115 disk full 1116 can’t access network volume 1117 media failed 1118 cannot make directory 1119 directory not empty 1120 copy function not available 1121 unknown file system 1122 no media 1123 volume structure corrupt 1124 invalid NTFS data 1125 exceeded maximum file size for file system 1126 no association for file 1127 data error detected in file using cyclic redundancy check 1128 path too long 1129 MD5 digest mismatch 1130 unexpected file size 1131 sha1 checksum mismatch 1132 file creation error on destination volume 1133 error wrting the delta to 1134 no more subfile data to read 1135 offset specified is invalid 1136 reached the end of the base file 1137 reached the end of the source file 1201 stopped by operator 1202 user declined 1204 user didn’t respond 1211 message corrupt 1212 session failed 1213 mailbox invalid 1214 message property invalid 1215 user lacks privilege to run as service 1216 user, password, or domain not recognized 1217 user lacks privilege to impersonate 1221 can’t access database 2001 scheduled stop 2002 Execution unit is busy 2003 no destination Backup Set specified 2004 no source Backup Set specified 2005 identical source and destination Backup Set 2006 no source volume specified 2007 no destination volume specified 2008 source and destination are on the same backup client 2009 source and destination volumes overlap 2010 no source volumes specified 2011 no destination Backup Sets specified 2012 no Proactive Backup scripts found 2101 could not use hardware compression accelerator 2102 could not use hardware encryption accelerator 2241 Catalog File invalid/damaged 2242 Catalog File duplicated or ambiguous 2243 Catalog File version incorrect 2244 Backup Set not supported 2245 file is not a Catalog File 2246 wrong Catalog File found 2247 Snapshot not found 2248 reached 10,000 Snapshot limit for File Backup Set 2249 could not find session 2250 file is not a Catalog File 2251 cant init Catalog File 2252 segment not found or invalid 2253 volume not found or invalid 2254 not blank, can’t use 2255 can’t access data portion of file set 2256 invalid member 2257 only some of the data on the member was removed 2258 not the last member written 2259 incomplete grooming detected 2260 can’t groom disk Backup Sets created with Retrospect 7.0 or earlier 2261 Catalog File in use back another machine 2301 Selector too deep or circular 2302 Selector has too many conditions 2303 Selector condition file system not available 2304 File system condition: chosen file system not available 2311 File system tree convertor not found 2350 File end missing 2351 File is encrypted 2352 File has changed 3010 registry item name too long 3011 registry path too long 3020 state buffer overflow 3021 security information appears incomplete 3040 the volume is not supported for shadow copy operations 3041 the maximum number of volumes in a Snapshot set has been reached 3042 there is already a Snapshot set in progress 3043 the maximum number of Snapshots has been reached 3044 the writer is not responding 3045 there is insufficient storage space to complete the operation 3047 disk inactivity threshold not met 3048 active directory is online and can’t be restored 3201 can’t use this client, Retrospect supports OS X Client version 6 or greater 3501 the tsa is not loaded 3502 invalid connection 3503 scan failed 3504 no more datasets 3505 invalid selection list 3506 data set in use 3507 no such smdr 3616 the database is inaccessible 3617 the function is not yet implemented 3619 Database not found 3620 Display Name for database not found 3621 Restore path not provided 3622 Instance not found 3623 Database can not be overwritten by a restore 3627 The Restore process is already in progress 3628 The file specified is already open 3629 The recipients are invalid 3630 Unable to perform the operation. Either you can not connect to the specified server or the service you are trying to connect to is not running 3631 A restore map already exists for the specified component. You can only specify a restore map when performing a full restore 3632 Another application has modified the specified Microsoft Exchange database such that any subsequent backups will fail. You must perform a full backup to fix this problem 3633 Unable to perform an incremental backup because a required Microsoft Exchange database log file could not be found 3634 The Microsoft Exchange component specified is configured to use circular database logs. It cannot be backed up without a full backup 3635 The databases have not been restored to this machine. You cannot restore an incremental backup until a full backup has been restored 3636 A communications error occurred while attempting to perform a local backup 3637 Snapshot backup not supported by server 3638 Wide char name provided can’t be converted to char name 3639 The restore environment information isn’t found 3640 Database name provided is invalid 3641 Destination database name provided is invalid 3642 Error writing restore environment information 3643 The path provided for restore log files is invalid 3644 Error loading callback function 3645 Error loading DLL for backup callbacks 3646 Error loading DLL for restore callbacks 3647 Callback function not provided 3648 File path provided is invalid 3649 Restore environment information corrupted 3650 Invalid parameter for number of file sections 3651 Backup file name provided is invalid 3652 Error updating restore environment information 3653 Destination name returned by server is invalid 3654 Error loading DLL for callbacks 3655 Already registered for backup and/or restore 3656 Error loading a resource 3657 Callback function not provided 3658 The log file base name does not match the one from previous logs 3659 The database destination to restore to is in use 3660 The restore environment is used by an other process 3661 The backup information returned by the server callback is invalid 3662 Functions called in an invalid sequence 3663 Restoring must be done by restoring the file 3664 Error returned from an ESE function call (%d) 3665 Error returned from a callback function call (0x%X) 3666 The RPC server is already listening 3667 Unable to close the DOS fil 3668 Unable to start a thread because there are none available 3669 The system is busy because there are too many I/Os 3670 The buffer page has been evicted 3671 Unable to find the page 3672 Unable to abandon the buffer 3673 The record has been deleted 3674 There is idle work remaining 3675 The key was truncated because it is more than 255 bytes 3676 There are too many key segments 3677 The key is NULL 3678 The log file is damaged 3679 No backup directory was given 3680 The backup directory is not empty 3681 Backup is already active 3682 A log file for the checkpoint is missing 3683 Unable to write to the log file 3684 The version of the log file is not compatible with the version of the Microsoft Exchange Server database (EDB) 3685 The time stamp in the next log does not match what was expected 3686 The log is not active 3687 The log buffer is too small to be recovered 3688 The maximum number of log files has been exceeded 3689 There is no backup in progress 3690 The backup call is out of sequence 3691 Unable to perform a backup now 3692 Unable to delete the backup file 3693 Unable to make a backup temporary directory 3694 An incremental backup cannot be performed when circular logging is enabled 3695 Errors were encountered during the repair process 3696 The current log file is missing 3697 The log disk is full 3698 A log file is damaged 3699 A database file is damaged 3700 A checkpoint file is damaged 3701 A checkpoint file either could not be found or is damaged 3702 The database is damaged 3703 There is a mismatch in the database’s last consistent time 3704 The patch file is not generated from this backup 3705 The starting log number is too low for the restore 3706 The starting log number is too high for the restore 3707 The log file downloaded from the tape is damaged 3708 Unable to find a mandatory log file after the tape was downloaded 3709 The data is not fully restored because some log files are missing 3710 The log file in the log file path is damaged 3711 Unable to find a mandatory log file in the log file path 3712 The database missed a previous full backup before the incremental backup 3713 The backup database size must be a multiple of 4K (4096 bytes) 3714 Some log or patch files are missing 3715 The database is being shut down 3716 The feature is not available 3717 The name is not valid 3718 The parameter is not valid 3719 The value of the column is null 3720 The buffer is too small for data 3721 The database is already attached 3722 The database ID is not valid 3723 The computer is out of memory 3724 The database has reached the maximum size of 16 GB 3725 Out of table cursors 3726 Out of database page buffers 3727 There are too many indexes 3728 There are too many columns in an index 3729 The record has been deleted 3730 A read verification error occurred 3731 Out of file handles 3732 A disk I/O error occurred 3733 The path to the file is not valid 3734 The record has exceeded the maximum size 3735 There are too many open databases 3736 The file is not a database file 3737 The database was not yet called 3738 The database was already called 3739 Unable to access the file 3740 The buffer is too small 3741 Either SeekLE or SeekGE did not find an exact match 3742 There are too many columns defined 3743 The container is not empty 3744 The filename is not valid 3745 The bookmark is not valid 3746 The column is used in an index 3747 The data buffer does not match the column size 3748 Unable to set the column value 3749 The index is in use 3750 Null keys are not allowed on an index 3751 The operation must be within a transaction 3752 No idle activity occured 3753 There are too many active database users 3754 The country code is either not known or is not valid 3755 The language ID is either not known or is not valid 3756 The code page is either not known or is not valid 3757 There is no write lock at transaction level 0 3758 The column value is set to null 3759 lMaxVerPages exceeded (XJET only) 3760 Out of cursors 3761 Out of sessions 3762 The write lock failed due to an outstanding write lock 3763 The transactions are nested too deeply 3764 The session handle is not valid 3765 Another session has a private version of the page 3766 The operation is not allowed within a transaction 3767 The database already exists 3768 The database is in use 3769 The database is not mounted or does not exist 3770 The database name is not valid 3771 The number of pages is not valid 3772 The database file is either damaged or cannot be found 3773 The database is locked 3774 An empty table was opened 3775 The table is locked 3776 The table already exists 3777 Unable to lock the table because it is already in use 3778 The table or object does not exist 3779 Unable to rename the temporary file 3780 The file/index density is not valid 3781 Unable to define the clustered index 3782 The table ID is not valid 3783 Unable to open any more tables 3784 The operation is not supported on tables 3785 The table or object name is already being used 3786 The object is not valid for operation 3787 Unable to build a clustered index 3788 The primary index is already defined 3789 The index is already defined 3790 The index does not exist 3791 Unable to delete a clustered index 3792 The index definition is illegal 3793 The clustered index is already defined 3794 Unable to create the index because an error occurred while creating a table 3795 Out of index description blocks 3796 The column value is too long 3797 The field will not fit in the record 3798 The value cannot be null 3799 Unable to delete because the column is indexed 3800 The length of the field exceeds the maximum length of 255 bytes 3801 Unable to find the column 3802 The field is already defined 3803 Only one auto-increment or version column is allowed per table 3804 The column data type is not valid 3805 The column was truncated because it exceeded the maximum length of 255 bytes 3806 Unable to index a long value column 3807 Tagged columns cannot be null 3808 The entry is not valid without a current index 3809 The key is completely made 3810 The column ID is not correct 3811 There is a bad instance identifier for a multivalued column 3812 AutoIncrement and Version cannot be multivalued 3813 Unable to find the key 3814 The currency is not on a record 3815 A clustered key cannot be changed 3816 The key already exists 3817 The current entry has already been copied or cleared 3818 No key was made 3819 Update was not prepared 3820 Data has changed 3821 The operation was abandoned because data has changed 3822 Moved to a new key 3823 There are too many sort processes 3824 An operation that is not valid occurred in the sort 3825 Unable to open the temporary file 3826 There are too many databases open 3827 The disk is full 3828 Permission is denied 3829 Unable to find the file 3830 The database file is read only 3831 Unable to restore after initialization 3832 The database log files are damaged 3833 The operation is not valid 3835 Target Instance specified for restore is not found or log files don’t match the backup set logs 3836 Directory contains log files that are in use by a running database. Chose a temporary location. 3837 That operation is not allowed while the recovery model is SIMPLE. 3838 Only full backups of the master database may be performed. 3839 The log sequence number of the log being applied does not match the current database. 3840 The operation terminated abnormally. 3841 There is no current database backup. This log backup cannot be used to roll forward a preceding database backup. 4001 the application is in a modal state 4002 the window isn’t allowed to open 4003 lost connection to the network printerf Last Update: June 15, 2015